PTC Air Heaters - MH Type

PTC's unique heat property allows the PTC heat output to be regulated by the airflow applied. The higher the airflow, the higher the heat output and power(wattage).

KLC's Standard PTC Air Heaters are designed with single stage heating (full power).  However, MH type PTC Air Heaters can be designed with multiple power stage by heating one or two tubes at a time.  It is more power efficient and will help extend heater life-time.  If require multiple stage heating, please contact our Sales Representatives in advance for special design and wiring.

MH Type diagram

Part Numbering

Notes on Part Numbering
1. PTC FIN PITCH (MH-XXXXS):
  • The Power(W) in the Specifications table is based on PTC air heaters with fin pitch 1.2mm(S).
  • The power(W) of PTC air heater with fin pitch 2.0mm(N) is 95% of PTC air heater with fin pitch 1.2mm(S)
  • The power(W) of PTC air heater with fin pitch 2.6mm(B) is 90% of PTC air heater with fin pitch 1.2mm(S)
  
2. PTC INSULATION (MH-XXXXS-XXXS):
  • The Power(W) in the Specifications tables are based on PTC air heaters with Single Insulation(S).
  • The price of PTC air heaters with double insulation(D) is 20~30% more than single insulation(S) PTC air heaters.
  • The power(W) of PTC air heater with double insulation(D) is approximately 10% less than PTC air heater with single insulation(S).
  • The PTC air heater with Double Insulation(D) does not have electrode potential on the fins. It is suitable for use where the device may be in contact with other conductive materials (eg. metal); expose to high humidity; with shock resistance requirement; or in products that require superior stability and quality (eg. automobiles).
3. ACCESSORIES (MH-XXXXS-XXXSX):
  • The "Other Accessories" in 4, 5, 8, B and D of Part Numbering will not include Thermostat for PTC air heaters with Maximum Inrush greater than 14A.
  • However, if specifically require thermostat to be included, please advise our Sales Representatives for possible alternatives.
  

Back to the Top/a>

Specifications (200V~240V)

  • Items that are highlighted in the table are standard models. The delivery time for these models are shorter and more economical.
  • Customized wattage, length and specifications can also be designed for large quantity.
  • The Power(W) specified in the table above is based on PTC heaters with fin pitch 1.2mm(S) and single insulation(S). Double insulated(D) PTC heaters will have 10% less power than specified in the table above (as power in table is based on single insulation).
    (Model: MH-2XXXS-XXXS)

Back to the Top

Specifications (100V~120V)

  • Items that are highlighted in the table are standard models. The delivery time for these models are shorter and more economical.
  • Customized wattage, length and specifications can also be designed for large quantity.
  • The Power(W) specified in the table above is based on PTC heaters with fin pitch 1.2mm(S) and single insulation(S). Double insulated(D) PTC heaters will have 10% less power than specified in the table above (as power in table is based on single insulation).
    (Model: MH-1XXXS-XXXS)

Back to the Top

 

ACCESSORY 1 : PTC + Mounting FramePTC Thermistor Characteristics

Temperature-resistant plastic frame that safely holds the PTC heating element.

 

Choose from one of the following frame models:

  • Frame Model : MHF-93 (for Length = 93mm)
    Part Number: MH-XXXX-93X1

  • Frame Model : MHF-106 (for Length = 106mm)
    Part Number: MH-XXXX-106X1

  • Frame Model : MHF-128 (for Length = 128mm)
    Part Number: MH-XXXX-128X1

  • Frame Model : MHF-90 (for all Lengths and Models)
    Part Number: MH-XXXX-XXXX2

 

ACCESSORY 2 : PTC + Mounting Frame + FANPTC Air Heater Assembly

You can also purchase our total solution of PTC heater  assembly, which includes:

  • a PTC Heater (MH Model with length = 128mm,106mm or 93mm)

  • a set of temperature -resistant plastic frame (Frame Model: MHF-128,106 or 93)

  • a standard 120mm x 120mm ball axial fan

  • terminal wire sets

  • a thermostat

  • a safety fuse

  • and screws (if pre-assembled using MH-XXXX-128XAa ) 

Part Number:
MH-XXXX-128XA (all accessories separate)
MH-XXXX-128XAa (all accessories assembled)

Back to the Top

  English homepage Translate to German Translate to Japanese Translate to Spainish Translate to Traditional Chinese