KLC Corporation

• PTC Heaters
  • PTC Thermistors Introduction
  • PTC Air Heaters
  • PTC Air Heater Frames
  • PTC Heat Conductors
  • PTC Thermistors
  • PTC Heater for Electric Vehicles
  • PTC Heater for Constant Battery Discharge
  • PTC Applications
  • PTC Technical Supports
• Flexible Heaters
• High Temperature Immersion Heaters
• Far Infrared Heaters
• Far Infrared Elements
• Home Therapy Apparatus
• Metal Stamping

 

PTC Air Heaters - SH Type

The PTC heat output can be regulated by the airflow applied in typical applications of heat generation. The higher the airflow, the higher the heat output and power(wattage).

• SH Type 200V~240V Specifications
• SH Type 100V~120V Specifications
• SH Type Accessories
• PTC Air Heater Datasheet Download (PDF)

Part Numbering

Notes on Part Numbering

1. PTC FIN PITCH (SH-XXXXM):
The Power(W) in the Specifications table is based on PTC air heaters with fin pitch 1.68mm(M).
2. PTC INSULATION (SH-XXXXM-XXXS):
The Power(W) in the Specifications tables are based on PTC air heaters with Single Insulation(S). The price of PTC air heaters with double insulation(D) is 20~30% more than single insulation(S) PTC air heaters. The power(W) of PTC air heater with double insulation(D) is approximately 10% less than PTC air heater with single insulation(S). The PTC air heater with Double Insulation(D) does not have electrode potential on the fins. It is suitable for use where the device may be in contact with other conductive materials (eg. metal); expose to high humidity; with shock resistance requirement; or in products that require superior stability and quality (eg. automobiles).
3. ACCESSORIES (SH-XXXXM-XXXSX):
The "Other Accessories" in 4, 5, 8, B and D of Part Numbering will not include Thermostat for PTC air heaters with Maximum Inrush greater than 14A. However, if specifically require thermostat to be included, please advise our Sales Representatives for possible alternatives.

Back to the Top

Specifications (200V~240V)

• Items that are highlighted in the table are standard models. The delivery time for these models are shorter and more economical.
• Customized wattage, length and specifications can also be designed for large quantity.
• The Power(W) specified in the table above is based on PTC heaters with fin pitch 1.68mm(M) and single insulation(S). Double insulated(D) PTC heaters will have 10% less power than specified in the table above (as power in table is based on single insulation).
  (Model: SH-2XXXM-XXXS)

Back to the Top

Specifications (100V~120V)

• Items that are highlighted in the table are standard models. The delivery time for these models are shorter and more economical.
• Customized wattage, length and specifications can also be designed for large quantity.
• The Power(W) specified in the table above is based on PTC heaters with fin pitch 1.68mm(M) and single insulation(S). Double insulated(D) PTC heaters will have 10% less power than specified in the table above (as power in table is based on single insulation).
  (Model: SH-1XXXM-XXXS)

Back to the Top

 

ACCESSORY : PTC + Mounting Frame

Temperature-resistant plastic frame that safely holds the PTC heating element.

 

Choose from one of the following models:

• Model : MSHF-70 (for Length = 70mm)
  Part Number: SH-XXXM-70X1

• Model : MSHF (for Length = 70mm)
  Part Number: SH-XXXM-70X3

• Model : MHF-90 (for All Lengths and Models)
  Part Number: SH-XXXM-XXX2

ACCESSORY 2 : PTC + Mounting Frame + FAN + Accessories

You can also purchase our total solution of PTC heater assembly, which includes :

• a PTC Heater (SH Model with length = 70mm)

• a set of temperature -resistant plastic frame (Frame Model: MSHF-70)

• a standard 92mm x 92mm ball axial fan

• a thermostat

• fuse

• a terminal wire set

• and screws (if pre-assembled using:SH-XXXM-70XAa).

Part Number:
SH-XXXM-70XA(all accessories separate)
SH-XXXM-70XAa(all accessories assembled)